Suppressing Ion Migration across Perovskite Grain Boundaries by Polymer Additives

Passivation of organometal halide perovskites with polar molecules has been recently demonstrated to improve the photovoltaic device efficiency and stability. However, the mechanism is still elusive. Here, it is found that both polymers with large and small dipole moment of 3.7 D and 0.6 D have negligible defect passivation effect on the MAPbI₃ perovskite films as evidenced by photothermal deflection spectroscopy. The photovoltaic devices with and without the polymer additives also have comparable power conversion efficiencies around 19%. However, devices with the additives have noticeable improvement in stability under continuous light irradiation. It is found that although the initial mobile ion concentrations are comparable in both devices with and without the additives, the additives can strongly suppress the ion migration during the device operation. This contributes to the significantly enhanced electrical-field stress tolerance of the perovskite solar cells (PVSCs). The PVSCs with polymer additives can operate up to −2 V reverse voltage bias which is much larger than the breakdown voltage of −0.5 V that has been commonly observed. This study provides insight into the role of additives in perovskites and the corresponding device degradation mechanism.     

A multifunctional biomedical patch based on hyperbranched epoxy polymer and MXene

Science China Technological Sciences - Biomedical patches play fundamental roles in various applications such as wound closure and tissue regeneration. The hybrid patches integrating versatile...     

Preparation of iron and nitrogen co-doped carbon material Fe/N-CCM-T for oxygen reduction reaction

In this paper, iron and nitrogen co-doped carbon material with nanotube structure (Fe/N-C_CM-T) was synthesized by pyrolyzing a mixture of Fe salt, chitosan and melamine and displayed high electrocatalytic performance for oxygen reduction reaction (ORR). The structure of the Fe/N-C_CM-T was characterized and their ORR performance in alkaline media was investigated by linear sweep voltammetry, cyclic voltammetry and chronoamperometry. Fe/N-C_CM-T displayed better ORR performance than other carbon materials like Fe/N-C_C-800. The Fe/N-C_CM-800 with a large surface area (302.5 m²/g) especially exhibited the best ORR electrocatalytic performance among the prepared carbon materials, which was also proved by its similar Tafel slope (76 mV decade^?1) to Pt/C catalyst (74 mV decade^?1). Fe/N-C_CM-800 showed similar ORR activity as commercial Pt/C catalyst, but superior tolerance to methanol and stability. Such high ORR performance of the Fe/N-C_CM-T can be attributed to its nanotube structure, high specific surface area (SSA), high graphitic-N and pyridinic-N contents.     

A highly active composite electrocatalyst Ni–Fe–P–Nb2O5/NF for overall water splitting

This work demonstrates a facile Nb₂O₅-decorated electrocatalyst to prepare cost-effective Ni–Fe–P–Nb₂O₅/NF and compared HER & OER performance in alkaline media. The prepared electrocatalyst presented an outstanding electrocatalytic performance towards hydrogen evolution reaction, which required a quite low overpotential of 39.05 mV at the current density of ?10 mA cm^?2 in 1 M KOH electrolyte. Moreover, the Ni–Fe–P–Nb₂O₅/NF catalyst also has excellent oxygen evolution efficiency, which needs only 322 mV to reach the current density of 50 mA cm^?2. Furthermore, its electrocatalytic performance towards overall water splitting worked as both cathode and anode achieved a quite low potential of 1.56 V (10 mA cm^?2).     

Droplet dynamics in a proton exchange membrane fuel cell flow field design with 3D geometry

Water management is crucial to achieve both high-performance and durability of proton exchange membrane fuel cell (PEMFC). Therefore, it is necessary to investigate the dynamic behavior of droplets in PEMFC channel for water management. In this paper, we explore the kinetics of droplets in a 3D flow field by experimental and theoretical analysis. More specifically, we examine the following four perspectives: 1) the movement and falling of droplets, and their force and deformation, 2) the superiority of 3D flow field drainage, 3) the pressure and viscous force under different scenarios including varying droplet sizes and velocities, and 4) the expression describing the shape change of droplets. The results show that the 3D flow field has a greater driving force on droplets and that their deformation affects the discharge of liquid water. Throughout the study, we provide better understanding of droplet dynamic in PEMFC gas channels. It enables to optimize the design and working conditions of these channels.     

Bending crashworthiness of thin-walled square tubes with multi-cell and double-tube cross-sections

Journal of Mechanical Science and Technology - For structural bending crashworthiness, previous studies mostly focused on thin-walled tubes with multi-cell cross-sections, while the double-tube...     

扫描隧道显微镜钨针尖的制备与表征

采用直流电化学刻蚀方法制备扫描隧道显微镜钨针尖,研究了电化学刻蚀过程中NaOH溶液浓度、钨丝浸入长度和刻蚀电压对针尖形貌的影响。通过扫描电子显微镜(SEM)测量针尖曲率半径和针尖纵横比值,以表征针尖的尺寸和形状;通过能谱仪(EDS)分析针尖表面成分,以表征表面清洁度;通过场发射显微镜(FEM)得到Fowler-Nordheim (F-N)曲线来检测针尖发射性能。实验结果表明,当溶液浓度为2 mol/L、钨丝浸入长度为4 mm、刻蚀电压为3 V时,可以得到曲率半径约为100 nm、纵横比值为13的针尖,且表面无钨的氧化层。FEM结果显示当对针尖施加500 V的负偏压时,针尖可以稳定发射50 nA量级的电流,且针尖性能具有良好的一致性。     

煤矿井下风水管路压力在线监测系统的研究与应用

为提高井下管路供风、供水的安全性、可靠性，以工业环网作为网络通信平台，通过分站采集数据上传至地面，实现对煤矿井下供风、供水管道的远程实时监控及远程控制，及时发现管网故障，提高维护效率、降低损失，保障供风、供水质量，达到科学预警、降低成本、提高效率的目的。     

Effects of Al addition on the phase transformation and interfacial evolution in multilayer Ti-B4C composite

The fully-dense multilayer Ti-B₄C composite doped with 6 wt% Al was fabricated via tape-casting and hot-pressing sintering at 1800 °C and under a uniaxial pressure of 30 MPa for 60 min. The effects of Al addition on the phase composition, interfacial microstructure and fracture toughness of the laminate composite were investigated. Based on the results of WDS and EDS, Al addition was proved to be effective on accelerating atom diffusion between Ti and B₄C due to the melting pool around interface where liquid Al enriched, besides, it helps to transform the interfacial bonding method of physical to metallurgical. Finally, the improvement on toughness of Al doped composite can be attributed to the strong metallurgical bonding and hybrid fracture mode of interface. Our study may provide a potential method for producing high strength and toughness multilayer metal/ceramic composites.